Reading and speaking times come from the same simple formula:

time in minutes = number of words ÷ words per minute

Everything interesting is in choosing the rate.

Reading time

For silent reading of English non-fiction, a 2019 review of reading-speed studies by Marc Brysbaert estimated an average of about 238 words per minute (about 260 for fiction). That is the default in the Reading Time Calculator.

Example: a 1,500-word article takes 1,500 ÷ 238 ≈ 6.3 minutes, shown as “6 min read”.

Adjust the rate for your audience and material:

  • Technical or dense material: lower the rate. Readers slow down for code, formulas and unfamiliar terms.
  • Screens and phones: reading is typically a bit slower than the average, and people skim more.
  • Non-native readers or younger readers: use a lower rate.
  • Images and tables add reading time that word counts don’t capture. Some publishers add a few seconds per image.

Speaking time

For speeches and presentations, around 130–150 words per minute is a common planning range; the Speaking Time Calculator defaults to 140. Energetic or conversational speakers often exceed 160; deliberate, formal delivery can drop below 120.

Example: a 700-word speech at 140 words per minute lasts 5 minutes, before pauses.

Real talks run longer than the arithmetic suggests. Pauses for emphasis, slides, laughter and questions all take time. Use the pause option to add a few seconds between paragraphs, and leave a margin in fixed time slots.

Working backwards from a time limit

If you have a slot to fill, use Minutes to Words: minutes × rate = words. For a 3-minute pitch at 140 words per minute, write about 420 words. Aim below the target rather than above it.

To convert a known word count, Words to Minutes shows reading and speaking time side by side.

Measure your own rate

The most accurate rate is your own. Read a 300-word passage aloud at your presentation pace, time it, and divide. For example, 300 words in 2 minutes 15 seconds (2.25 minutes) is 133 words per minute. Enter that rate in the calculator and your estimates will be much closer to reality.